• Protruding SC Ferrule / SMA905 Optic Fiber Pigtail Polishing
  • Protruding SC Ferrule / SMA905 Optic Fiber Pigtail Polishing is a fiber cable with a ceramic ferrule at one end and SMA905 connector at the other end. The end with a ferrule could couple laser diode modules while the other end can be connected to the core of other cables by welding for output. Optical fiber pigtails are also often found in fiber optic terminal boxes to connect fiber optic calbes to fiber optic transceivers. Fiber pigtail are divided into multi-mode fiber pigtail and single mode fiber pigtail, could choose coating either one end or both ends.

  • Product parameter download
  •    ◆  Product application     

    -Fiber laser pump diode coupling

    -High power laser processing flexible transmission

    -Medical laser equipment coupling transmission

    -High power laser test and measurement

    -Fiber Optic Sensor (Connecting photoelectric detector)

    -Optical fiber access network

    -Local area networks

    -Test equipment

    -Optical fibers sensor

       ◆  Product feature     

    -The fiber tip is directly polished without any epoxy in the process, which can avoid laser absorption caused by epoxy residue and reduce the fiber burn rate efficiently.

    -High quality fiber tip polishing surface, without scratches and particles on the fiber core.

    -Coat only on bare fiber tip (without ferrule &epoxy),which can eliminate film cracking caused by inconsistent thermal expansion coefficients of different substrates under the coating layer.

    -Avoid the impact of the ferrule and epoxy on the laser chip at a close distance, effectively reducing COD and chip Contamination. 

    -Low heat absorption and high laser damage threshold of coating layer, Optical damage threshold (> 200 MW/cm2, Test by Quantel USA,)

       ◆  Product parameter     
    Fiber Type400/440-22NA , Customized
    Length of the fiber150cm+/-10cm, Customized
    Coating ParameterAnti-reflection coating, R<0.5%@800-1000nm;Customized
    Assembly MethodInstall protruding SC ceramic ferrule to the end of the coated bare fiber, and keep the other end with SMA905 without coating
    Protruding length1mm+/-0.5m, Customized
    Fiber ferrule typeStandard SC or LC ceramic ferrule or Customized ferrule

       ◆  Coating curve     


       ◆ Product outline     


    Copyright © 2012-2019 PHOTONSTREAM all Rights Reserved. 
    WeChat customer service
    WeChat customer service

    Ask WeChat customer service

    Consulting feedback
    Mobile website

    Mobile website