Fiber pigtail laser diode connector is a fiber cable with FC/PC at one end and no connector at the other end. The end without a connector can be connected to the core of other cables by welding. Optical fiber pigtails are also often found in fiber optic terminal boxes to connect fiber optic calbes to fiber optic transceivers. Fiber pigtail are divided into multi-mode fiber pigtail and single mode fiber pigtail.
◆ Product application |
-Fiber laser pump diode coupling
-High power laser processing flexible transmission
-Medical laser equipment coupling transmission
-High power laser test and measurement
-Fiber Optic Sensor (Connecting photoelectric detector)
-Optical fiber access network
-Local area networks
-Test equipment
-Optical fibers sensor
◆ Product feature |
-The fiber tip is directly polished without any epoxy in the process, which can avoid laser absorption caused by epoxy residue and reduce the fiber burn rate efficiently.
-High quality fiber tip polishing surface, without scratches and particles on the fiber core.
-Coat only on bare fiber tip (without ferrule &epoxy),which can eliminate film cracking caused by inconsistent thermal expansion coefficients of different substrates under the coating layer.
-Avoid the impact of the ferrule and epoxy on the laser chip at a close distance, effectively reducing COD and chip Contamination.
-Low heat absorption and high laser damage threshold of coating layer, Optical damage threshold (> 200 MW/cm2, Test by Quantel USA,)
◆ Product parameter | |
Fiber Type | SMF-28e, Customized |
Length of the fiber | 150+/-10cm, Customized |
Coating Parameter | Anti-reflection coating, RC 0.5%@1550+/-20nm;Customized |
Stripped length | 5+/-1mm |
Loose tube length | 9mm diameter, Customized |
Fiber ferrule type | Standard FC/PC connector, Customized |
◆ Coating curve |
Ask WeChat customer service
Mobile website